Zapp Part 1...haven`t written this one yet..will on wednesday..not much post on this one so this is what i`ve

found so far..plus USE Transcenders on this puppy..its right on the Money from my reports...FZ RIP Monitoring

Collect data packets to analyse them with a spreadsheet application =performance monitor What to use to gather

stats and export to a spreadsheet to analyze =Perf mon Which utility will you use to export the statstics collected

to a spread sheat for future analsis? =PERFORMANCE MONITOR What utility will you use to construct a

capacity planning on all statistical datas you collected? =PERFORMANCE MONITOR

What to use to monitor ethernet & tcpip stats =netstat & network mon What is the utility to monitor the Ethernet

traffic and the TCP/IP stasticts? =NETSTAT -e -s what do you use to monitor TCP/IP stats(choose two)?

=netstat,…=perf mon What to use to view tcpip stats that are cumulative from the last time you started the comp

=netstat 'analyses cumulatively = `netstat' what do you use to monitor TCP/IP stats since the last reboot?

=netstat What needed to capture and analyze frames, then send to a file =Ntwk mon what do you use to capture

and examine Ethernet frames? =network monitor You don't want to have trap messagees from unauthorized SNMP

Hosts. How will you configure the SNMP agent workstation? ="Community Name" ="Only Accept SNMP

packages from these Hosts". You want to audit a SNMP-Client by a UNIX host. What do you need. =community

name =IP - address of UNIX-hosts, that the traps have to be sent to You want to monitor the NT Workstation

performance from a Unix client. How will you do it? What Software (utility?) at NT Workstation and at Unix host?

=SMNP MANAGEMENT SOFTWARE ON THE UNIX =SMNP SERVICE ON THE NT SERVER. You want to

monitor an NT servers packets remotely from a UNIX host, what do you install? =SMTP service on server,

=SMTP package on UNIX what do you install on a UNIX workstation to monitor a NT server? =UNIX-SNMP

management app, =NT-SNMP(worded funny) DHCP You have three subnets in which a single subnet is

populated with 10 Laptop workstations and the other two subnets with NT Workstations. You want the 1st

subnet to be supplied with IP addresses(of course by DHCP) with a lease acqusition period of 10 days.The other

two subnets with 30 & 40 days lease period respectively. How will you configure? =BY IMPLEMENTING ONE

DHCP SCOPE FOR EACH SUBNET AND PECIFYING THE LEASE PERIOD AS PART OF EACH SCOPE'S

CONFIGURATION.

There are several subnets, each having its own DHCP-Server. Required result: Each client receives its unique

IP-address automatically Optional result: DHCP - server must work even if one of them is down Proposed

solution: Configure each DHCP-server to use the scope of another server as well =D)does not work; (double

IP-addresses possible)

There are several subnets, each having its own DHCP-Server. Required result: Each client receives its unique

IP-address automatically Optional result: DHCP - server must work even if one of them is down Proposed

solution:Install a DHCP-server that covers all the IP-scopes of all subnets Do the same with all the other

DHCP-servers =does not work, double IP-addresses possible Scenerio`s You want to enable a server to work as a

router. required result……routing must be possible optional results……dynamical routing enabled (XXXXXXX)

SNMP traps are to be sent to a SNMP - manager (XXXXXXX) Solution…….Activate IP-forwarding….install

PPTP……install DHCP C)..Required Result(NO OPTIONS)

Network with 100 workstations and 20 UNIX computers. UNIX computers never move, TCP/IP is protocol used.

DHCP configured with one scope for each subnet. All Windows based computers are set up as DHCP clients.

Required results: 1) Every Windows based computer on each subnet must be able to access the Windows NT

Server computers by computer name. 2) Every Windows based computer on each subnet must also be able to

receive its IP address from the DHCP server. Optional: 1)All UNIX systems should access by hostname any

Windows NT Server computer that is set up as an FTP server. 2) All Windows based computers should access

by hostname any UNIX computer that is set up as an TELNET or FTP server. Proposed Solution: 1) Set up

network routers and forward DHCP broadcasts to all subnets 2) Install Wins server on the network 3) Install DNS

server and configure it for name resolution 4) Set up DHCP server to supply all DHCP clients with the IP address

of both the WINS sever and the DNS server. 5) On the DHCP server, exclude the UNIX computers' IP addresses

from the scope. 6) On the WINS server, make static mapping entries for UNIX computers. A)Produces required

and both optional results in this scenario. (However,there was one right before it that was close but only

produced one of the optional results because they did not install DNS and configure it for name resolution so

the.... Optional Result#1) All UNIX systems should access by hostname any Windows NT Server computer that

is set up as an FTP server was not achieved.)

You want to enable a server to work as a router. required result..routing must be possible optional

results…dynamical routing enabled SNMP traps are to be sent to a SNMP - manager (XXXXXXX)

Solution….activate IP-forwarding …..install RIP ……install DHCP B)Required and One Option

Printing what do you install on a NT server with an attached device to allow a UNIX machine to print to it?

=TCP/IP printing service You have a NT-Server, Windows-Clients and a printer connected to a UNIX-host. What

do you need. =TCP/IP Priting Sevice Installed???

You want the Windows based machines to print at a UNIX-Network printing device connected to a NT Print

Server. How will you redirect the jobs to the net printer? =LPR You want to send the print jobs to a UNIX

workstation from the windows based machines.Which utility will you use? =LPR What does an NT - client need

to print to a printing device connected to aUnix host =LPR??

You want the Unix member workstations to print jobs at the NT print server connected print device. How will you

configure? =INSTALL TCP/IP PRITING SERVICE =SHARE THE PRINTER. How will you configure the printer on

the server, if the server will manager the printer? =INSTALL TCP/IP PRITING SERVICE, CONFIGURE A LPR

PORT FOR THE PRINTER AND SHARE THE PRINTER. At the client only connect to the printer.

You want to view the print jobs that are sent to UNIX printer from a windows based Workstation.Which utility

will you use? =LPQ What do you need to audit a printer connected to a UNIX - host =LPQ??? Hosts/LMHOSTS

Files A PDC and several BDCs in different subnets must be able to 'see' each other without using wins.

=adequate #PRE and #DOM - entries in their LMHOSTS -files.

Browsing with the Lmhosts File =in each Lmhosts-File on an Domain Controller should be the other Domain

Controller for browsing, User Account updating and User logon.

How will you log on to a Domain controler which is in another domain and for that what entries do you require at

your Workstation's lmhosts file? (PDC and BDC) #PRE #DOM

You can ping the remote host using the IP address but not through netuse \\....\... Why? =WINS or LMHOSTS.

You can ping a remote - client by using its IP-address but not by using its name, whereas you can ping all the

other hosts in the remote subnet by IP-address as well as name. client is neither WINS-enabled nor does he have

an entry of your computer in its =LMHOSTS - file.

LMHOSTS - file with '#' in front of the names. - =does not work

When you ftp a host name using UNC you get a "Bad IP address" message. What could be the possible reason?

=HOSTS FILE.

157.21.36.121 UNIX Product 157.51.25.110 Product developer Above is a Hosts file entry.When you say "ftp

product" you get attached to the ftp server. But when you say "FTP 157.51.25.110" you can't reach it.Why?

=INVALID FTP SERVER'S IP.... You have to know how the HOSTS file works.....

Misc How to configure a RAS - server that directly accesses the internet and uses PPTP. Clients access the RAS

server via an ISP that is accessed with a modem. =PPTP filter

Your NT Server in your office is connected via RAS connectivity to the Internet ISP Server through the ISDN

communcation. Now you want the Windows 95 workstation users in your internel subnet to get connected to the

ISP. How will you do that? =PPTP

Client A ------ router ------- Client B routers left IP-address is 200.64.64.1, its right IP-address is 200.64.32.1. Why

can Client A not access client B? =Its DG was 200.64.64.1

Host ------- router ------ server Class B net host's IP : ...82.2 routers left IP-address is ...64.1, its right IP-address is

...32.1. SM 255.255.240.0 Why can the host not access the server =With this SM the host is in a different subnet

than it's DG.

Why a workstation is not making a broadcast even when it can't resolve through other methods? =P-NODE

A client broadcasts to much to connect to other clients on the same subnet. =wrong subnet mask

Why unnecessarily a machine is doing arp broadcast even when the target machine is in the same subnet while

other machines in the same subnet are not? =B-NODE or INVALID SUBNET MASK

You plan a internetwork. How many NET-Ids do you need? (Choose two) one for each subnet ???? one for each

host one for each host' s NIC one for each router' s interface one for each WAN - link???

what determines how many host id's needed for a subnet mask?(choose two) =NIC for host, =router interface

Utilities Clear the NETBIOS - cache =NBTSTAT -R

Show the NETBIOS - Cache =NBTSTAT -c

what do you use to find the path a packet takes? =tracert

What to use if session suddenly stops responding =netstat

What is the utility to view who are all currently having TCP/IP connection with your Workstation? =NETSTAT

What utility can be used to run a command on a remote host? =TELNET

What utility for seeing the IP address-to- MAC- address resolution? =ARP

What is the utility to purge the contents of the arp cache? =ARP -d

What is the utility to view what configuration changes the DHCP made at your workstation Configuration?

=IPCONFIG /ALL Name Servers(wins-dns)

You don't want to resolve host names into IP address using a DNS which contains static entries in it.What will

you install in alliance with DNS to resolve IP address from a dynamically updated DNS database? =WINS and

ENABLE THE DNS FOR WINS RESOLUTION.

You have 6 subnets, each has 150 Windows NT workstations; 25 UNIX systems; 25 win95 notebooks. You have

a DNS server on one subnet and each subnet has a Wins server. How you can do less Administration on the

DNS? =By enabling wins resolution for DNS. (DHCP can only integrate with WINS if you specify the 44/NBNS

server, and /46NBT node type)

UNIX - hosts must be made able to use wins for name resolution. DNS is already installed. =Use WINS resolution

in DNS. (Be careful: They asked for WINS reverse lookup in this context, which is wrong)

Three UNIX machines are to be stored in the WINS Database manually and what entry will you put at the WINS

configuration panel? =STATIC UNIQUE ENTRY

If you have 5 subnets you want to implement wins how many wins server you need? =One

You are not able to ping the IP address of a remote host on another subnet using Netbios name but through IP

address.You can also ping the other hosts on that subnet using both ways.What went wrong? =CLIENT NOT

USING WINS SERVER.

You want a Workstation in Subnet A to browse and Communicate with the other workstation in subnet B. But

you can't even though they have their own WINS Servers installed.What will you do? =WINS REPLICATION.

You have Subnet A, Subnet B and Subnet C. The Workstations in the subnet A&B uses the WINS in the Subnet

A. The Workstations in Subnet C uses its own. How will you configure to have the users of Subnet C and B to

browse themselves freely? =WINS REPLICATION.