•You have an administrator in domain1. Domain2 trusts domain1.What do you have to do to allow the domain1 administrator to be an administrator in domain2? PICK ONLY ONE!
1) create a local group in domain1
2) create a local group in domain2
3) create a global group in domain1
4) add the adminstrator account to the domain2 local administrator group
•Option 1 - not applicable. •Option 2 - a local group ALREADY
exists in domain2 that could be used, Administrators. X •option 3
follows the model - it doesn't answer the question completely, but
it follows the model. Obviously, the numbers and particular
situation will change from test to test, however, the premise will
be the same, "do you know the model?" •Option 4 answers the
question. However, it does not follow the model of user accounts
into global groups and global groups into local groups!!!
------------------------------------------------------------------------
•If you have a stripe set (without parity), and one disk fails, how do
you retrieve the data using a fault tolerance method?
•You can't. It's not a stripe set WITH PARITY!
------------------------------------------------------------------------
•You have a Hewlett Packard LaserJet printer on a UNIX box,
which you wish to print to via your NT Server. What protocol do
you install?
•TCP/IP, not DLC, since you're printing to the unix box, not a
network printer
-----------------------------------------------------------------------
•MariaG in an administrator in Domain A. Domain B trusts A.
What do you have to do so that MariaG is an administrator of
Domain B as well?
•(multiple answers)
------------------------------------------------------------------------
•Domain A trusts Domain B. You want a user of Domain B to
access a resource on a server in Domain A. How would you do this
by creating only one account?
•Create a local account on that server, add the user to it
------------------------------------------------------------------------
•What is the difference between the print spooler and router?
•Where they reside
------------------------------------------------------------------------
•If you want to enable TCP/IP dial-up, where do you install RAS
to?
•NT Server
------------------------------------------------------------------------
•When Printing from an Intel to a RISC based printer, where do
the drivers need to be?
•both drivers need to be on the server
------------------------------------------------------------------------
•What do you need to print using TCP/IP from Line Printer
Daemon (LPD)?
•The IP address
------------------------------------------------------------------------
•What is the default spooler location?
•c:\winnt_root\system32\spool\
------------------------------------------------------------------------
•How does Gateway Services for Netware do what it does between
a NT workstation and a Netware server.
•The gateway translates an SMB received by the Gateway into an
NCP packet over IPX (and back again).
-----------------------------------------------------------------------
•You change the ReplicationGov. Setting on a BDC. What effects
does this have?
•Lowers buffers on BDC or PDC and Lowers frequency of calls
to/from PDC or BDC.
------------------------------------------------------------------------
•Adding WFW 3.11 machine to domain. What needs to happen?
•In Control Panel Network Utility you must configure WFW to
logon to Domain •The test answer looks like this, however: b)
WFW client has to configure itself to logon to a domain
------------------------------------------------------------------------
•NT Server connected to UNIX, want to use HP Printer connected
to UNIX machine, NT clients will be running NWLink. What other
protocols need to be running?
•DLC is for direct Network connected Printers so you don't need
that.
TCP/IP is default for UNIX so you do need that XNS is real old
beginnings of Ethernet stuff you'll never see it. Xerox made it.
(along with the first ethernet, with some help)
Client are running only NWLink so you need that.
So if you remembered everything it is just TCP/IP & IPX
------------------------------------------------------------------------
•How can you tell if you have excessive memory paging?
•Use Perfmon. If your paging represents > 20% of all I/O, then
you probably have insufficient memory. •In performance manager,
there are only three of four main items to check.
------------------------------------------------------------------------
•A server has poor performance and you suspect that its paging
excessively. What do you do?
•Add RAM.
------------------------------------------------------------------------
•You have 2 domains, guest account is disabled on both, Domain A
and B. Want all users in both domains to have access to a resource
in Domain A. What 2 steps do you have to perform. Want to use
only one group to manage.
a) Create local group on A
b) Create local group on B
c) Add all users to global group on A
d) Add all users to local group on A
....
•You would set up "A" (resource) to trust "B" (master)
then create local group in "A" with rights to resource
then add global group from "b" to local group in "A" (probably
Domain USERS"
so a) would be this answer
------------------------------------------------------------------------
•Give the two steps required to do a network based installation of
windows 3.11.
•The options will be something like "connect to a share with the
winnt source files, and run winnt.exe.
------------------------------------------------------------------------
•List the steps to create a server based home directory for a user,
------------------------------------------------------------------------
•15 scientists work on a collective pool of data. Each user is
responsible for security and backup of the information. Which
domain model should you use?
------------------------------------------------------------------------
•Which variable in the registry do you change to slow down
replications of accounts?
------------------------------------------------------------------------
•You install a new video card and you get no video, what do you
do? Emergency disk, or reboot w/ last known good, or reboot to
vga and install new drivers.
------------------------------------------------------------------------
•Know the format and uses for the arc line in the boot.ini.
-----------------------------------------------------------------------
•Know how to recover a failed drive from a mirrored set.(assuming
boot drive fails.)
-----------------------------------------------------------------------
•Know what is needed to install a tape backup device to a Winnt
machine.
•ie. Software, drivers for the device, or drivers for the scsi card.
------------------------------------------------------------------------
•Know the advantages and disadvantages for mirroring, disk
stripe, and disk stripe w/ parity.
•Mirroring: redundancy and can be boot partition. •Disk stripe:
fastest, but no redundancy. •Disk stripe w/ parity: faster than
mirroring and has redundancy, but slower than regular disk
striping, because calculations must be done to write to the disk.
------------------------------------------------------------------------
•A 3.11 user has been set up to be able to access resources on a
domain. The user can access a printer, but cannot access a shared
directory. What would you do to troubleshoot this problem.
•Options like reboot win3.11 client. Make client relogin.
------------------------------------------------------------------------
•Susan is an administrator in Domain a. Domain B trusts A. How
do you let Susan administer Domain b.
•Make susan a member of local or global group in domain a or b.
------------------------------------------------------------------------
•Netware users need to access an SQL database on an NT server,
what must you do to set up this function.
------------------------------------------------------------------------
•A server in your domain has mac connectivity in place, what must
you do to allow the macs to use resources on other servers in the domain.
------------------------------------------------------------------------
•List the protocols that can be used with a RAS connection. (RAS server).
------------------------------------------------------------------------
•If your machine uses SLIP, in what capacity can it operate. Only
as a SLIP client to an external SLIP server.
------------------------------------------------------------------------
•Users need to access, through RAS, a netware server, what
protocols and/or services need to be in place.
------------------------------------------------------------------------
•You install server and have made many changes in the last few
days, now you can't log in, what do you do?
------------------------------------------------------------------------
•Same question, but you can log in, but program manager won't
respond. What do you do?
------------------------------------------------------------------------
•How do you make an emergency repair disk?
------------------------------------------------------------------------
•How can you minimize memory usage when there are less than 10
users connected?
•Need to know place and function.
------------------------------------------------------------------------
•You want to control some printers with an NT server, and you
have machines running windows 3.11 and UNIX, how would you
set this up?
------------------------------------------------------------------------
•You connect a new HP laserjet to a printer pool, but the HP port
option does not show up in print manager, what could be wrong?
------------------------------------------------------------------------
•How does an NT machine communicate with a UPS system.
•It uses a Com Port.
------------------------------------------------------------------------
•A user in Domain A needs to access a share in Domain B.
Domain B trusts Domain A, what needs to be done to let user
access the share.
------------------------------------------------------------------------
•You begin auditing an NT machine, where do you look at the
data?
•Event viewer, security.
------------------------------------------------------------------------
•Which window do you use in performance manager to record and
save data?
------------------------------------------------------------------------
•How do you set up the browser to send browse information to a
Lan manager 2.x system?
------------------------------------------------------------------------
•Know the keys in registry. Top level.
------------------------------------------------------------------------
•Which built in groups can create and share a directory?
•Admins, Power user, Domain users, server operators.
------------------------------------------------------------------------
•Which groups can you audit, default groups, everyone, server ops.?
------------------------------------------------------------------------
•Steps to connect a 3.11 machine to the domain. What is required?
------------------------------------------------------------------------
•Machine is using PPP in RAS, this machine can act as 1. Ppp
server, ppp client, what else?
------------------------------------------------------------------------
•Ras clients are being randomly disconnected, the setup is
correct, where would you look for more information.
•Modem.inf
------------------------------------------------------------------------
•For an NT box to export a file, the machine must be nt
workstation or server in domain or workgroup. Which of the four?
------------------------------------------------------------------------
•When copying files to another NTFS directory, what happens to
the ownership and security permissions?
------------------------------------------------------------------------
•A server is running NWLink, what resources can a user running
netware client access?
------------------------------------------------------------------------
•A server running gateway for netware networks can do what?
•Convert smb to ncp(?) messages
------------------------------------------------------------------------
•What is needed on both ends (protocols,services) to connect a
mac to an NT server.
------------------------------------------------------------------------
•Know how to setup win3.11 validation. Steps and requirements.
------------------------------------------------------------------------
•You copy an NTFS directory to a FAT partition, what happens to
permissions and filenames and ownership of the files.
------------------------------------------------------------------------
•Same question, FAT partition to NTFS partition.
-----------------------------------------------------------------------
•A disk in a stripe set w/ parity fails, steps to recover.
------------------------------------------------------------------------
•Files in a common directory keep disappearing, no one will fess
up to deleting the files, how could you explore this problem.
•Audit user file deletion.
------------------------------------------------------------------------
•What requirements are there to backup a system registry.
------------------------------------------------------------------------
•A user in an untrusted domain can't see a share, what can you do
to let him see the share?
------------------------------------------------------------------------
•Three domains, users in all three need access to resources on a
server in domain one, what trusts need to be set up to accomplish this?
------------------------------------------------------------------------
•What hardware is needed to accomplish disk duplexing?
------------------------------------------------------------------------
•Domain W trusts Domain E, a user in Domain W needs access to a share in Domain E. Guest accounts have been disabled in each Domain, how can user access this share?
•(One option is "User cannot access this share")
------------------------------------------------------------------------
•Corporate setting, 150 users with 5 servers in a centralized
office. MIS wants to keep complete control of user accounts and
resources. Which domain model would you use?
------------------------------------------------------------------------
•A user needs access to NT and Netware servers, how is this done?
------------------------------------------------------------------------
•You have set up an NT server with Gateway for Netware and the server must server to printers on a unix network, what protocols must be in place?
------------------------------------------------------------------------
•Which server feature eliminates the need for the lmhosts file?
------------------------------------------------------------------------
•Corporate setting, 30000 users, MIS wants total account control, but wants departmental managers to control local resources. Which domain model would you use?
------------------------------------------------------------------------
•Two domains, user needs access to a server in other domain, you
want to use one group to accomplish this, what do you need to do?
•(two steps, a trust and create a group)
------------------------------------------------------------------------
•Domain E trusts Domain N. You create a local group in domain e.
What can this group contain?
•Users from N, Global groups from N, Global groups from E, local
groups from E.
------------------------------------------------------------------------
•You suspect excessive paging, what do you check in performance manager.
------------------------------------------------------------------------
•You install a new serial mouse, and you old mouse was a bus mouse, what do you need to do?
------------------------------------------------------------------------
•You install a second ethernet card, what settings do you need to
verify to avoid any conflicts?
------------------------------------------------------------------------
•Question asks about a DHCP window setting, and what can this machine do?
•The settings shown have the machine using DHCP for configuration, which means that the machine can't be a DHCP server, or a backup DHCP server.
------------------------------------------------------------------------
•You install new scsi drivers, and your system won't boot, know
the steps needed to use the emergency repair disk.
------------------------------------------------------------------------
•You want to add a third HP printer to a printer pool, what do you need to do.
•Create printer, install driver, others?
------------------------------------------------------------------------
•You have a group of 15 researchers that need a network for print and some file sharing. Security is of ultimate concern because of the nature of the work. What type of network should you implement.
A) Complete trust domain with each researcher administer of his own server.
B) Master domain model
C) Multiple master domain model
D) Single domain model with each researcher made an administrator of the domain.
E) Workgroup with each researcher administer of his own workstation.
------------------------------------------------------------------------
•1. Which users can create shares
A. Admin
B. Power Users
C. Server Op
D. Users
Answer: A, B and C
------------------------------------------------------------------------
•2. Unsupported internal modem, how do you configure it.
A. Use null port for modem
B. Use unsupported modem from list of modems
C. Change switch.inf
D. Add modem calls to modem.inf file
Answer: D
-----------------------------------------------------------------------
•3. RAS connection fails, where do you look.?
A. system.log
B. device.log
C. modem.log
D. serial.log
Answer: device.log
------------------------------------------------------------------------
•4. You make changes to services installed where will it be updated in the registry?
A. Local_Machine
B. Root_Class
C. Local_User
D. Current_Local_User
Answer:A
------------------------------------------------------------------------
•5. Replication Govenor is configured, what will it do?
A. Decrease buffer size calls from PDC to BDC
B. Decrease buffer size calls from BDC to PDC
C. Decrease frequency calls from PDC to BDC
D. Decrease frequency calls from BDC to PDC
Answer: B and D
------------------------------------------------------------------------
•6. What can be an Export Server?
A. NT Workstation in a domain
B. NT Workstation in a workgroup
C. NT server in a domain
D. NT server in a workgroup
Answer: C & D
------------------------------------------------------------------------
If you have benefitted from these pages, please return the favor,
and send information regarding these exams after you have taken
the test, so that we all can benefit from your experience.
------------------------------------------------------------------------