1.You have clients who use PPP to access the server. Some of the clients are using dial up networking and others are using a third party PPP that support DES encryption only. What is the highest security you can implement?

I answered use encrypted but I got one wrong on connectivity

2.You have server running NetBEUI and TCP/IP. Clients are also using NetBEUI and TCP/IP. What do you have to do to setup to enable Winsock from a remote connection?

I answered Slip for TCP/IP, again I got one wrong on connectivity

3.Your network is configured as a single domain that has three domain controllers and 25 NT workstations. For security purposes you assign roaming user profiles to all user accounts in the domain. The profiles are mandatory. The server on which the profiles are stored fails. What will happen when users attempt to log on to the domain while the server is shut down?

Users will be unable to log on.

4.You have a mirror set with SCSI disks with BIOS disabled. You want to create a boot disk to automatically boot to the mirror partition, how do you set up the ARC path on your boot-disk? (a picture shows the disk administrator)

Disk 0: system, Data, Data

Disk 1: Data, Mirror set (system), Data

Scsi (0) disk(1) rdisk(0)partition (2)

5.You are administering a Windows NT Server computer from a Windows 95 client computer. You install Server Admin Tools on the Windows 95 computer. You want to share something a CD ROM on the Server computer, what must you use on the Win95 computer to do this?

Server Manager

6.You have 4 SCSI drives each with a 1GB partition with there own disk controllers. The boot and system files are on a separate partition on one the first hard drive. You want fault tolerance and you want to be able to continue if one of the drives should fail? What do you implement?

Stripe set with parity

7.What file do you need on an NT boot disk for a SCSI controller with BIOS disabled? (there were four files I had never even heard of).

ntbootdd.sys

8.You have PDC set up to perform directory replication as shown in the picture. (shows the replication management screen, with the PDC set to use its export and import features). Where should the files you want to replicate to the server computer be placed.

In a subdirectory of the Winnt40\system32\repl directory.

9.What happens to file permissions when you move files from one folder to another on the same NTFS partition?

All file permissions are retained.

10.Your RAS server has two internal modems. Remote users report that when they try to dial in to the RAS server, they are being disconnected immediately. What should you use to diagnose the problem?

Device.log

11.You have a server consisting of NetWare servers, Windows 95 clients and WinNT workstation clients. All clients have have Client for MS networks and IPX compatible protocols installed. You want to add a Win NT server computer and wish to allow the client computers to access a shared SQL database, what do you have to install on the server?

NwLink

12.You have a server running Nwlink and clients also running Nwlink, some of the clients cannot communicate with the server, what could be wrong.

Frame type

13.You are running Performance monitor on an NT Workstation. You are monitoring memory and disk performance on 10 WinNT Servers. Performance on the Workstation is poor and you want to increase performance but how?

Increase the interval you are collecting data

14.You move a file from a NTFS to a FAT partition on the same disk. What happens? Select two.

Long File Names are retained

Permissions are not retained

15.What must be installed before you can migrate users from a NetWare Server to NT?

GSNW

16.In Performance Monitor, which objects/counters should you use to measure excessive paging?

Memory:pages/second

17.You want to create a roaming profile for alec, how do you do this?

Use user manager for domains to specify a UNC for the profile.

18.You have one PDC and three member servers. You want to allow members to log on if the PDC fails, how do you do this?

Reinstall Winnt server on one of the Member servers and make it a BDC.

19.Your Windows NT server computer has one controller and 3 physical disks. What is the best way to implement fault Tolerance on your computer to allow maximum amount of storage space?

Implement disk striping with parity

20.John has been promoted from the sales department to management. He needs to be able to change files in a share called PrivData. You have added him to the managers group, but he can not access PrivData. What do you need to do? (a picture shows that the Managers group have change permission to PrivData and the Sales group have no access).

Remove John from the Sales group

21.You use Performance Monitor and your %processor Time is close to 92% sustained, and you are experiencing excessive paging. What should you do?

Add more RAM

22.You want to monitor disk space usage on a WinNT Server. You want to be notified when disk space left is under 25%. How?

Performance Monitor - Alert on % Free space counter

23.What do you use to backup the registry files of the Windows NT Server?

Ntbackup.exe

24.One disk in a mirror set goes bad, after installing a new hard drive what do you need to do next?

Use disk administrator and under Fault Tolerance, break the mirror set.

25.You are monitoring 10 servers with five monitors for each server with alerts set to report on activity every 5 seconds, and many of your PC's functions are running rather slow. How do you improve you PCs performance?

Increase the monitor interval

26.A printer has stopped working. It is connected to your NT Server. You want to move the spooled print files to another network printer, how?

Reconfigure the stalled printer port to the a new with the UNC name of the new printer

27.You have two printers which you want to pool, which of the following are required.

Both printers must use the same printer driver.

28.You have a server with two NIC cards which connect two subnets. How do you set the IP address's?

Manually assign each a unique IP address.

29.You are is configuring 100 Windows NT workstations to access resources on a NetWare server. The workstations will be connecting to the NetWare server through a Windows NT Server computer acting as a gateway. After you install GSNW on his Windows NT server, what else must you do so the workstations can access the resources on the NetWare server?

Create a group called NTGATEWAY on the NetWare server and add users who need access to NetWare resources to this group.

30.You central server connect to three remote locations, each with its own server. Each location has client computers running NetBEUI and TCP/IP. The clients use NetBEUI for internal communication and TCP/IP to connect to the central server. The clients do 90% of there communication locally, what can you do to improve their communication?

Move NetBEUI to the top of the client bindings

31.You have two printers and one of them jams, what will happen to the document that was being printed?

It will stay spooled until the print device is repaired

32.You have to hard drives. Drive D is formatted with NTFS, Drive C is formatted Fat and contains the system and boot partitions and some data files. You want to implement security and change Drive C to NTFS without losing any data, how?

Use the convert command from the command prompt

33.You attach an external tape drive to your NT Server. The tape uses a SCSI controller which you also install. What must you do to allow the new tape drive and the SCSI controller to work?

Install a device driver for the SCSI controller

Install a device driver for the Tape drive

Restart the server computer

34.113: You have NT Server computer. You install the client Network Admin Tools on your Win95 workstation. How can you remotely manage file and directory permissions?

Explorer

35.Which window do you use in Performance Monitor to record and save data over a period of time?

Log View

36.What program do you use to read *.dmp files?

Dumpexam.exe

37.You have a picture showing the RAS server properties. You need to point at the setting to allow user to specify their own security level?

Allow any authentication including plain text

38.You install TCP/IP on a client workstation in a nonroutable network. You have already assigned an IP address manually to the server. What other parameter must you specify to complete the TCP/IP installation?

A: The subnet mask

39.You have a PDC, a BDC and client workstation. You schedule your tape backup to backup your servers and all workstations starting at 8 PM. When you arrive the next morning, the backup is just finishing up. You want to make sure it finishes by 6 AM. What is the best way to do this?

A: Put a 2nd tape drive on the other server, make one tape drive backup the servers and the other backup the workstations.

40.Using free partition space on a SCSI drive, you create a new partition. You highlight the free space, select create from the partition menu, specify size and click OK. The new drive appears in the Disk Administrator display. What should you do next in order to finish creating the partition?

Select Commit Changes Now.

41.154: DHCP Server can allocate an IP Address automatically, what other options can it supply to clients? Select ALL that apply?

Default Gateway

DNS Server

WINS Server

42.You have a PDC called Main1. You install a member server with a share called PAYROLL. The global group ACCTMGRS from PDC need to access this share (PAYROLL). How you manage?

A: Create a local group on member server called FINANCE and add the ACCTMGRS global group into FINANCE and grant the FINANCE group permission.

43.You want to monitor TCP/IP activity on 3 NT servers from your workstation computer. What would you install?

SNMP on each servers

44.You install Admin Tools on a win95 machine, where do you manage printer security?

Windows Explorer

45.Your Installing NT Server and your non-SCSI CD-ROM not detected, what should you do?

Restart the installation again and select "S" to specify additional devices.

46.Your computer is currently running MS-DOS and you would like to install Windows NT Server 4.0 using a CD. How do you do this?

Boot to MS Dos, run Winnt/b from the CD

Boot from the Setup disk (I almost overlooked this answer)

47.You want to upgrade your Windows 95 computer to run Windows NT Server 4.0. You copy the Winnt files to a share on the server called CF1. Which of the following will work?

Boot to win95, connect to the share and run Winnt/b

48.You have a single 3.0 GB hard drive on your Windows NT computer. You have created one primary partition C and one extended partition with a logical drive D. If you create a new primary partition what is the new drive letter for the logical drive?

E

49.Your boss has asked you to configure a specific print device on the network so that all documents sent to the device from the company managers are printed before all other documents. What should you do?

Create another printer for managers and assign the new printer a priority of 99.

50.You have two main groups sharing the same print device-Finance and Sales. The Sales group is always complaining that the Finance group is tying up the print device with their large print jobs. Users in the Sales group usually have to wait a long time before they can print their small jobs. When you poll users of the Finance group, you find that their print jobs are not a priority and can

be printed after-hours. What is the best?

Create another printer and ask users with large print jobs to use the new printer. Configure the printer so it is only available after work hours.

51.If you want your Windows NT server to run a shared Access database, what should you modify?

Server service

52.You have five hard disks and you want to implement a disk set. You want the set to have the fastest read and write operations. You are not concerned about fault tolerance. Which of the following disk sets should you implement?

Stripe set without parity.

NT Server

Hi Everyone!!

I had just completed my test . My score is 963.

I had already completed networking essentials test . This is my second one. Thanks a lot for maintaining this site and my thanks to everyone who had contributed to this site .

my section scores: Managing resources:90%, Monitoring and Optimizing

:87% rest all are 100%

Course Materials used

NT 4.0 Tech supp. trg from MS press,

Books Online !! from NT CD

Support online of MS(http://support.microsoft.com/support)

(If u have any doubts u can search for the corresponding articles in

this site)

Braindumps!!!!!!!!!

The following questions i had not seen in Briandumps

1)In a TCP?IP non routed network apart from IP address what else?

A) SUBNET MASK

2)In a routed TCP/IP Network

A) IP adress, Subnet Mask , Default gateway.

3)In a single domain network with domain controllers and memberservers.

How to achieve login script to be processed by any

server in the domain which is validating the user login?.

Options:

a) Synchonize all BDCs with PDC

b) Enable directory replication service on all servers.

I chose B. as the keyword was any server

(I got 100 in planning)

4) MANDATORY PROFILE WHEN PDC IS DOWN?

A:USERS CANT LOGIN

(for details refer to user profiles guide in the Support online)

rest all questions i had seen in the brian dumps. So go thru it VERY

VERY IMPORTANT!!!!!!!!!